by | | WEM | Script
CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES For this example variable number 5 will be used. You can use all variables from 1 to 99. The value of the variable has to be between 1 to 999.This project consists of seven shows, which are controlled by one...
by | | WEM | Script
CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES This project consists of five shows, which are controlled by one pushbutton. After each actuation of the pushbutton a new show is started.Therefore the command !vmc1=X# has to be inserted at the end of each show,...
by | | WEM | Script
CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES The project consists of one show, which is triggered by each contact closure via input 1. Therefore the restart mode is required.In show 1 there are six variable decrement commands (!vmc-1#) with a time gap of one...
by | | WEM | Script
CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES This project consists of three shows and is controlled via three DMX channels.The first DMX channel starts the second show, the second DMX channel starts the first show and the third show is started via the third...
by | | WEM | Script
CONTROL.INI – WEM | SCRIPT ™ CASE STUDIES The project has six different areas. Each area can be filled with four different recorded voice sounds, which are German, Spanish, French and English. The languages can be changed with a rotary switch. So 24 shows...
